The proven and worldwide standardized real-time mechanisms of the SERCOS Interface have defined a landmark in the world of field-busses. At the same time Ethernet TCP/IP has established itself as the standard for non real-time communication on all levels of automation.
SERCOS-III combines the advantages of both worlds. The result impresses by its extreme performance with low costs and high user friendliness.
With SERCOS III products from AUTOMATA entering this technology is easy and affordable.
SERCOS III is versatile
Various field devices (drives, IOs, controls, ...) can communicate over a standardized real-time interface.
SERCOS III is efficient
Cycle times between 31,25 ìs and 65 ms
Synchronization accuracy < 20 ns
Simultaneity < 100 ns
Slaves can directly exchange real-time data among each other within one cycle.
SERCOS III is universal
Any Ethernet protocol (TCP/IP, UDP/IP, ...) can run simultaneously to the real-time data transmission - tunneling is not necessary.
SERCOS III is safe
Safety functions up to SIL3 over „CIP Safety on SERCOS“.
SERCOS III is highly available
Thanks to the ring redundancy feature communication can continue free of distortion even at cable break. The re-configuration time is less than 25 ìs.
SERCOS III is flexible
central or decentral - ring or line - hot-plugging and hot-swapping - hierarchical, synchronous network structures
SERCOS III is simple
Standardized device models and profiles, exact diagnosis down to IO channel level, simple cabling by exchangeability of
the two ports.
SERCOS III is cost-efficent
no hubs, no switches etc. - cost-efficient and flexible FPGA implementation
SERCOS III is an international standard
IEC 61158 - IEC 61784 - IEC 61800-7
SERCOS III is proven
More than 2 million SERCOS devices in over 350.000 applications world-wide.
Send page
